跳转至

Specification of Vehicle-2-X Basic Transport (V2XBasicTransport)

返回本类索引

属性 值
平台 CP
类别 SWS — 软件模块规范（Software Specification）
UID 794
规范版本 R25-11

本地文件

  • 规范 PDF: F:\Work\Standards\01_Sources\CP_SWS_V2XBasicTransport_794\AUTOSAR_CP_SWS_V2XBasicTransport.pdf
  • ARXML 模型: F:\Work\Standards\01_Sources\CP_SWS_V2XBasicTransport_794\AUTOSAR_CP_SWS_V2XBasicTransport.arxml
  • 纯文本全文: F:\Work\Standards\01_Sources\CP_SWS_V2XBasicTransport_794\zzgen\CP_SWS_V2XBasicTransport.complete.txt

文档简介

This specification specifies the functionality, API and the configuration of the AUTOSAR Basic Software module Vehicle-2-X Basic Transport (called "V2xBtp module" in this document).

V2xBtp module together with Vehicle-2-X Facilities (V2xFac), Vehicle-2-X GeoNetworking (V2xGn), Vehicle-2-X Management (V2xM), Vehicle-2-X Data Manager (V2xDM) and AUTOSAR BSW module Ethernet Interface (EthIf) forms the V2X stack within the AUTOSAR architecture.

The base for this document is the BTP specification . It is assumed that the reader is familiar with this specification. This document will not redefine BTP functionality, but it will try to follow the same order as the BTP specification.

模块依赖

This section describes the relations of the V2xBtp module to other modules within the AUTOSAR basic software architecture. It outlines the modules that are required or optional for the realization of the V2xBtp module and the V2xBtp services that these modules use.

章节结构

  1. 简介与功能概述
  2. Architectural 概述
  3. 功能概述
  4. 缩略语
  5. 相关文档
  6. 输入文档与相关标准规范
  7. 相关规范
  8. 约束与假设
  9. 限制
  10. 适用的车型领域
  11. 对其他模块的依赖
  12. AUTOSAR DET (Default 错误 Tracer)
  13. AUTOSAR EcuM (Ecu 状态管理器)
  14. AUTOSAR V2xFac (Vehicle-2-X Facilities)
  15. AUTOSAR V2xGn (Vehicle-2-X GeoNetworking)
  16. 需求追踪
  17. 功能规范
  18. 通用功能
  19. Message Reception
  20. Message Transmission
  21. 错误分类
  22. Development 错误
  23. Runtime 错误
  24. Production 错误
  25. Extended Production 错误
  26. API 规范
  27. Imported 类型
  28. 类型定义
  29. V2xBtp_TxParamsType
  30. V2xBtp_RxParamsType
  31. 功能定义
  32. V2xBtp_Init
  33. V2xBtp_GetVersionInfo
  34. V2xBtp_Transmit
  35. Callback 通知
  36. V2xBtp_RxIndication
  37. V2xBtp_CopyTxData
  38. Expected 接口
  39. Mandatory 接口
  40. Optional 接口
  41. Configurable 接口
  42. _RxIndication
  43. 时序图
  44. 发送请求
  45. 接收指示
  46. 配置规范
  47. How to read this chapter
  48. Containers and 配置 parameters
  49. Variants
  50. VARIANT-PRE-COMPILE
  51. V2xBtp
  52. V2xBtpGeneral
  53. V2xBtpRxIndicationFunction
  54. 发布信息
  55. 附录
  56. History of 规范 Items
  57. Traceable item history of this document according to AUTOSAR Release R25-11
  58. Added 规范 Items in R25-11
  59. Changed 规范 Items in R25-11
  60. Deleted 规范 Items in R25-11
  61. 规范 Item History of this document compared to AUTOSAR R24-11
  62. Added 规范 Items in R24-11
  63. Changed 规范 Items in R24-11
  64. Deleted 规范 Items in R24-11
  65. 规范 Item History of this document compared to AUTOSAR R23-11.
  66. Added 规范 Items in R23-11
  67. Changed 规范 Items in R23-11
  68. Deleted 规范 Items in R23-11
  69. 规范 Item History of this document compared to AUTOSAR R22-11
  70. Added 规范 Items in R22-11
  71. Changed 规范 Items in R22-11
  72. Deleted 规范 Items in R22-11
  73. Constraint Item History of this document compared to AUTOSAR R22-11
  74. Added Constraints in R22-11
  75. Changed Constraints in R22-11
  76. Deleted Constraints in R22-11